Vapor Degreasing

Vapor Degreasing

Contact Us

Contact Us

Vapor Degreasing

*=required field

Techspray has a large variety vapor degreasing cleaners that are engineered to be less toxic than many other solvents, yet powerful enough for the most difficult soils.

Vapor degreasing is a cleaning process that involves rinsing and cleaning parts in ultra-pure vapor. The process doesn’t require any water or scrubbing and is used to safely clean various materials like plastic, glass, metal, gold, and ceramic.

Vapor degreasing can be found in any industry where precision cleaning is critical. It is common in the automotive, aviation and aerospace, medical device manufacturing, jewelry manufacturing, and electronic assembly.

Precision-V vapor degreasing solvents are ideal replacements for cleaners containing Freon, HFC-141b, and AK225. Exposure to Precision-V solvents is less hazardous than many other solvents: e.g. TCE (trichloroethylene, CAS #79-01-6), nPB (n-propyl bromide, CAS #106-94-5), and perc (perchloroethylene, CAS #127-18-4).

For the closest (and safest) cost and performance match to n-propyl bromide, nothing beats PWR-4 Maintenance Cleaner and PWR-4 Flux Remover.

Click here for the latest information on the EPA’s designation of n-propyl bromide as an “unacceptable risk”. Check out the in-depth discussion on the topic in our webinar “Replacing N-Propyl Bromide (NPB): What You Don’t Know CAN Hurt You”.

Not sure which product is right for your application?  Check out our Vapor Degreaser Product Selection Guide or our technical article “Vapor Degreasing: The Quick Guide”.


FAQ's

What is the difference between degreaser and sanitizer?

A degreaser is intended to clean a surface, so remove contamination. A degreaser is designed specifically to remove oils, greases, and lubricants. Sanitizers are intended to kill various pathogenic agents, like bacteria and viruses. There are materials that can do both, like 70% isopropyl alcohol (per CDC guidelines for hard surface disinfecting), but don’t assume all degreasers will kill pathogens.

What chemicals are in degreasers?

The ingredients of a degreaser can vary wildly depending on the product. Generally speaking, they fall into 2 camps: 1) solvent cleaners – this includes alcohols (like isopropyl alcohol, or ethyl alcohol), hydrocarbons (like heptane and mineral spirits), ketones (like acetone and xylene), and more exotic compounds and blends. 2) water-based cleaners – these include ingredients dissolved or blended with water. Which is best for your application depends on the type of soil and various requirements like performance, evaporation rate, toxicity limits, and environmental regulations.

Is Windex a degreaser?

Windex (or other similar glass cleaners) could be considered a very light-duty degreaser. Glass cleaners can remove very light oils, like fingerprints, but will fall very short with heavier oils, greases and lubricants. Techspray offers a foaming glass cleaner (part #1625-18S) and water-based Eco-Shine (1505-QT) for light cleaning, and products like G3 Maintenance Cleaner (1630-16S), PWR-4 Maintenance Cleaner (3400-20S), and E-LINE Maintenance Cleaner (1620-10S) for more heavy-duty oils, greases and lubricants.

Articles

Webinar: PCBA Cleaning Defects – Product or Process?
Webinar: PCBA Cleaning Defects – Product or Process?   Speakers: Pierce Pillon – Senior Field Engineer, ITW Contamination Control Electronics Kevin Pawlowski – Application Specialist, ITW Contamination Control Electronics Eric Camden – Lead Investigator, Fo...
Leer Esta Publicacion
The Expert’s Guide to Degreasers & Maintenance Cleaners
What is a degreaser? A degreaser is a cleaner designed to remove grease, oils, cutting fluids, corrosion inhibitors, handling soils, finger prints, and other contamination common in assembly, stamping, other types of metal fabrication, refineries, motor repair, airplane hangars, and many other appl...
Leer Esta Publicacion

Videos