E-Line Flux Remover

Request A Sample
Request SDS

Request SDS

E-Line Flux Remover

*=required field

Sku Number Name Size Units
Per Case
1621-10S E-LINE Flux Remover - 10oz aerosol } 10 oz (284g) 12
1621-10SB E-LINE Flux Remover w/brush - 10oz aerosol } 10 oz (284g) 12
Packaging Order minimum case quantity only. Extra shipping fees may apply.
Order from an authorized distributor
E-Line is a hydrocarbon-based flux remover formulated to be powerful, yet very economical. Eliminates brushing and scrubbing, saving time and materials. Micro-components and fine pitch leads are delicate and easily damaged, so brushing and scrubbing should be avoided if possible. Techspray flux remover spray has a powerful spray that blasts off residues and cleans areas under components that a brush cannot touch.

Features & Benefits

  • Powerful cleaner
  • Ideal for sensitive plastics
  • Zero residue
  • Proven effective for lead-free processes
  • Non-ozone depleting

Specifications: USDS K2

Call-outs: Ford TOX # 142431, GM Cadillac-Flint (1621-10S) H1013

FAQ's

How do you use an aerosol cleaner?

Hold object to be cleaned in vertical position. Pull trigger gently to control solvent flow rate. Scrub with brush from top to bottom, allowing the liquid to flush away contaminants. 

How do I properly dispose of an aerosol can after it is empty?

It may be different state-by-state, so contact your state environmental agency for regional specific regulations. For a general guideline, here is the process according to EPA hazardous waste regulations 40CFR. The can has to be brought to or approach atmospheric pressure to render the can empty. Puncturing is not required, only that it “approach atmospheric pressure”, i.e. empty the can contents until it’s no longer pressurized. This insures that as much contents as is reasonably possible are out of the can. It is then considered “RCRA-empty”. At that point it can be handled as any other waste metal container, generally as scrap metal under the recycling rules. Note that the can is still considered a solid waste at this point (not necessarily hazardous waste).

Is there something I can do with the extension tube (straw) so it doesn’t get lost?

The aerosol trigger sprayers that are common on dusters, freeze sprays, and flux removers, have two ways to store the straw when not in use. The hole at the back of the body of the sprayer is just the right size for the straw to slide into place for storage. The slot below the trigger is also the right size for the straw to snap into place, which also has the advantage of locking the trigger.

How do I figure out the shelf life of a product?

The shelf life of a product can be found on either the technical data sheet (TDS), available on the product page, or by looking on the certificate on conformance (COC). The COC can be downloaded by going to https://www.techspray.com/coc. Once you have the shelf life, you will need to add it to the manufacture date for a use-by date. The manufacture date can be identified by the batch number. The batch code used on most of our products are manufacture dates in the Julian Date format. The format is YYDDD, where YY = year, DDD = day. For example, 19200 translates to the 200th day of 2019, or July 19, 2019. This webpage explains and provides charts to help interpret our batch numbers: https://www.techspray.com/batch-codes.